After the last cataclysm, our civilization began to restore knowledge. The main fundamental task of mathematicians was to find the base value on which the calculation system is based. Without solving the mystery of the nine system, they created an erroneous system. At this point the number Pi (3.14...) appeared. This means that today’s length measurement is not correct.
Even NASA uses Pi with 15 to 20 decimal places in its calculations and thus comes to incorrect results. The decimal system is necessary, but it must be used taking into account the number Ra (the square root of ten).
It's unlikely that humanity will decide to correct the mistake, because this requires changing the value of a second, a millimetre etc. Therefore, this world will remain in a false dimension of time and space. Even school rulers cannot be changed without introducing a new number system. Below is a small part of the calculations. You will see the proof that the current system is wrong and the difference between the wrong and the right system.
| Multiplying by Pi (3,14) | Multiplying by Ra (3,16) |
|---|---|
| 1 х Pi = 3,14 | 1 х Rа = 3,16 |
| 2 х Pi = 6,28 | 2 х Rа = 6,32 |
| 3 х Pi = 9,42 | 3 х Ra = 9,48 |
| 4 х Pi = 12,56 | 4 х Rа = 12,64 |
| 5 х Pi = 15,7 | 5 х Rа = 15,8 |
| 6 х Pi = 18,84 | 6 х Rа = 18,96 |
| 7 х Pi = 21,98 | 7 х Rа = 22,12 |
| 8 х Pi = 25,12 | 8 х Rа = 25,28 |
| 9 х Pi = 28,26 | 9 х Rа = 28,44 |
| 1413 : 9 = 157 (average value) | 1422 : 9 = 158 (average value) |
| Multiplying by Pi (3,14159265) | Multiplying by Ra (3,16227766) |
|---|---|
| 1 х Pi = 3,14159265 | 1 х Rа = 3,16227766 |
| 2 х Pi = 6,2831853 | 2 х Rа = 6,32455532 |
| 3 х Pi = 9,42477795 | 3 х Rа = 9,48683298 |
| 4 х Pi = 12,5663706 | 4 х Rа = 12,64911064 |
| 5 х Pi = 15,70796325 | 5 х Rа = 15,81138830 |
| 6 х Pi = 18,84955590 | 6 х Rа = 18,97366596 |
| 7 х Pi = 21,99114855 | 7 х Rа = 22,13594362 |
| 8 х Pi = 25,13274120 | 8 х Rа = 25,29822128 |
| 9 х Pi =28,27433385 | 9 х Rа = 28,46049894 |
| 141,371669250 : 9 = 15,70796325 | 142.302494700 : 9 = 15,81138830 |
| 3,14159265358979 х 3,14159265358979 = 9,869604401… |
| 3,16227766162277 х 3,16227766162277 = 10,000000009… |
| 10 : 3,14159265 = 3,183098865… |
| 10 : 3,16227766 = 3,162277660… |
| 3,14159265 х 3,14159265 = 9,869604379… |
| 3,16227766 х 3,16227766 = 9,999999998… |
At school students are not taught how to think, but rather how to memorize formulas.
An example:
Did you know that the addition of two semi-axis values of an ellipse results in
the diameter of the circle? Yes, exactly the diameter of the circle because an
ellipse is a flattened circle. This is because the area of an ellipse cannot be
increased or decreased, just like the area of a circle. Why then do modern
calculations of the circumference of an ellipse based on the semi-axes lead to
different results?
I now present two examples of calculations from seven websites, of which only one (kontrolinial.It) gives reasonably correct results.
Calculation of the perimeter of an ellipse
Semi-axes: 1) R-7,75; r-4,75 and 2) R-22,5; r-13,5
| My calculation: | 1)=39,26990812; 2)=113,0973354 |
|---|---|
| https://www.kontroliniai.lt/ru/matematika/raschet-ploshadi/ploshad-dlina-ellipsa/ | 1)=39,26990816; 2)=113,0973355 |
| 1)=40,38504831; 2)=116,57806509 | |
| https://fin-calc.org.ua/ru/calculator/geometry/perimeter/ellipse/ | 1)=38,29049829; 2)=114,87149488 |
| https://microexcel.ru/dlina-ellipsa-kalkulyator/ | 1)=39,88796146; 2)=115,02875206 |
| https://abakbot.ru/online-2/259-ellipse | 1)=39,83746059; 2)=114,87149488 |
| https://geleot.ru/education/math/geometry/calc/ellipse/semiaxis | 1)=39,874; 2)=114,986 |
As just
mentioned, the area of a circle cannot change when it is flattened into the
shape of an ellipse. This means that we use the values of the semi-axes to
bring the ellipse back into the shape of a circle and carry out the correct
calculation. In this case we add the values of the semi-axes:
Example no. 1) R-7,75
+ r-4,75 = 12,5 х 3,14159265 = 39,26990812.
Example no. 2) R-22,5
+ r13,5 = 36 х 3,14159265 = 113,0973354.
In real geometry it says: Any figure that is in a closed line has a closed space.
Those who have not
grown up to have their own opinion parrot the opinions of others. There is even a competition to see who can add the most decimal places in
the number Pi. Tens of trillions
have already been added.
The square root of ten gives the number 9.99999999999999979762122758866849. Compare this number to the number Pi, which is much further from ten.
By
restoring the correct ruler markings, the world will get much more accurate
results in calculations instead of rough approximations. The decimal system is
not changed, only the length of ten changes. This is not necessary for everyday
calculations but is necessary for large quantity calculations carried out by
research organizations. To do this, you simply have to enter the correct ruler
marking corresponding to the number Ra into the computer program.
I
deliberately showed you no more than 12 decimal places of the number Ra in
order to make you think. Try to add the decimal places yourself so that when
you multiply the number Ra by itself, only the digit 9 is after the decimal
point. So, the number is 3.16227766015... This riddle is more
interesting than the nonsense of adding trillions of decimal places to the
number Pi.
Aslan Uarziaty
(Translated from the book in Russian "Послание от Бога. Экзамен начался").
No comments:
Post a Comment